Syllabus

Ternopil Ivan Puluj National Technical University

Каф. інжинірингу машинобудівних технологій

Production Engineering

syllabus

1. Educational programs for which discipline is mandatory:

# Educational stage Broad field Major Educational program Course(s) Semester(s)
1 master's 13. Механічна інженерія 131. Прикладна механіка (магістр) 5 9

2. The course is offered as elective for all levels of higher education and all educational programs.

3. Information about the author of the course

Full name Baranovsky Viktor
Academic degree PhD
Academic title Prof.
Link to the teacher`s page on the official website of the department
Е-mail (in the domain tntu.edu.ua)

4. Information about the course

Study hours structure Lectures: 28
Practical classes: 14
Laboratory classes: 0

Amount of hours for individual work: 78
ECTS credits: 5
Teaching language english
Form of final examination exam
Link to an electronic course on the e-learning platform of the university https://dl.tntu.edu.ua/bounce.php?course=5416

5. Program of discipline

Description of academic discipline, its goals, subject of study and learning outcomes

Discipline «Production Engineering» aims at studying the general principles of the content and stages of technological preparation of production, which assures the quality design and manufacture of the product.

The place of academic discipline in the structural and logical scheme of study according to the educational program

Prerequisites. List of disciplines, or knowledge and skills, possession of which students needed (training requirements) for successful discipline assimilation

Theoretical foundations of mechanical engineering

Contents of the academic discipline

Lectures (titles/topics)

Technological preparation of production and its role in machine-building production.
Ensuring technological design of the product. Work out the design of the product for the technological.
Work out the design of the product for the purpose of identifying the necessary equipment, technological equipment, cutting tool and control means.
Development of tasks for the design of special equipment, technological equipment, cutting tool and control means.
Procedure for the compilation, approval and modification of information on technological routes.
Rules for drawing up, approving and updating information of technological routes.
Rationing the cost of materials. Calculation of consumption rates.
Preparation in detail specific material consumption standards.
Manage the process of conducting technological preparation of production.
Methods of network planning and management in the technological preparation of production.

Practical classes (topics)

Development of design documentation for technological capacity.
Preparation of the information of the necessary equipment, equipment of metal cutting and measuring tools, calculation of their needs.
Development of tasks for the design of technological equipment.
Preparation of technological routes information.
Calculation of material consumption rates.
Composition according to detail material consumption rates.
Preparation of a network planning schedule for the preparation of production.

Learning materials and resources

. Гевко, Б.М. та ін. Методичні вказівки до практичних занять, курсового і дипломного проектування з курсу «Технологічна підготовка виробництва». [Текст] / Б.М.Гевко, А.В.Матвійчук, І.Г.Ткаченко. – Тернопіль: Вид-во ТДТУ, 1998. – 18 с.
2. Гевко, Б.М. та ін. Сіткове планування і управління в технологічній підготовці виробництва: Методичні вказівки. [Текст] / Б.М.Гевко, І.Г.Ткаченко, Д.Л.Радик, І.Б.Гевко. – Тернопіль: Вид-во ТДТУ, 1998. – 18 с.
3. Ткаченко, І.Г. Забезпечення технологічності конструкції складальних одиниць: Методичні вказівки. [Текст] / І.Г.Ткаченко. – Тернопіль: Вид-во ТДТУ, 1999. –19 с.
4. Пилипець, М.І та ін. Правила заповнення основних форм технологічних документів: Навчально-методичний посібник. [Текст] /М.І. Пилипець, І.Г. Ткаченко, М.Г Левкович, В.В. Васильків, Д.Л. Радик. – Тернопіль: Вид-во ТНТУ ім. І. Пулюя, 2009. – 104 с.
5. Капаціла, Ю. Б., Ткаченко, І.Г. Методичні вказівки до практичних занять та самостійної роботи студентів усіх форм навчання «Формування конструкторсько-технологічного коду деталі». [Текст] /Ю.Б. Капаціла, І.Г. Ткаченко. – Тернопіль: Вид-во ТНТУ ім. І. Пулюя, 2010. – 24 с.
6 Единая система технологической подготовки производства. [Текст] / – М.: Издательство стандартов, 1978. –360 с.
7 Единая система конструкторской документации. [Текст] / – М.: Изд-во стандартов, 1982. –351 с.

6. Policies and assessment process of the academic discipline

Assessment methods and rating system of learning results assessment

In recent years, teachers of the department pay considerable attention to the organization
independent work of students, development of criteria for assessing students' knowledge of
disciplines, forms of tests, exams.
According to the system of complex diagnostics operating at the university
students' knowledge in order to stimulate systematic and systematic
educational work, assessment of students' knowledge is carried out on a 100-point scale
system.
Forms of control of students' knowledge:
- current;
- modular;
- final (test, exam).
Assessment of students' knowledge at the university is carried out for 100-
point scale.


Table of assessment scores:

Assessment scale
VNZ
(100 points)
National
(4 points)
ECTS
90-100 Excellent А
82-89 Good B
75-81 C
67-74 Fair D
60-66 E
35-59 Poor FX
1-34 F
Approved by the department
(protocol №
on «
»
y.).