Syllabus

Ternopil Ivan Puluj National Technical University

Каф. інжинірингу машинобудівних технологій

Processing Technologies

syllabus

1. Educational programs for which discipline is mandatory:

# Educational stage Broad field Major Educational program Course(s) Semester(s)
1 bachelor's 13. Механічна інженерія 131. Прикладна механіка (бакалавр) 4 8

2. The course is offered as elective for all levels of higher education and all educational programs.

3. Information about the author of the course

Full name Pankiv Vitalii
Academic degree PhD
Academic title none
Link to the teacher`s page on the official website of the department
Е-mail (in the domain tntu.edu.ua)

4. Information about the course

Study hours structure Lectures: 32
Practical classes: 32
Laboratory classes: 0

Amount of hours for individual work: 86
ECTS credits: 6
Teaching language english
Form of final examination exam
coursework
Link to an electronic course on the e-learning platform of the university https://dl.tntu.edu.ua/bounce.php?course=5117

5. Program of discipline

Description of academic discipline, its goals, subject of study and learning outcomes

The discipline "Technique for the processing of typical parts and assembling machines" provides a complex of knowledge necessary to provide the shaping of surfaces of typical parts with the corresponding technical requirements, and also provides the acquisition of the necessary practical skills and abilities necessary for the development of effective technological processes of mechanical processing of typical parts and manufacturing processes of assembly with the necessary precision of machines. " provides a complex of knowledge necessary to provide the shaping of surfaces of typical parts with the corresponding technical requirements, and also provides the acquisition of the necessary practical skills and abilities necessary for the development of effective technological processes of mechanical processing of typical parts and manufacturing processes of assembly with the necessary precision of machines.

The place of academic discipline in the structural and logical scheme of study according to the educational program

Prerequisites. List of disciplines, or knowledge and skills, possession of which students needed (training requirements) for successful discipline assimilation

Тechnological bases of mechanical engineering, operation and maintenance of machines

Contents of the academic discipline

Lectures (titles/topics)

Types of information when designing technological processes.
Design of typical and group technological processes.
Body parts manufacturing technology.
Shafts manufacturing technology.
Technological processes of processing parts of the class "non-round rods".
Technological processes of gear wheels treatment.
The technology of typical connections assembling.

Practical classes (topics)

Development of stepped shafts processing technological processes.
Development of body parts processing technological processes.
Development of hollow bar processing technological processes.
Development of technological processes of flanges and disks processing.
Development of technological processes of lever and fork processing.
Development of technological processes of gear wheels processing.
Development of technological processes of machines assembly.

Learning materials and resources

1. Картавов, С.А. Технология машиностроения (специальная часть) [Текст] / ФС.А. Картавов. – К.: Выща школа, 1984. – 272 с.
1. Клепиков, В.В. Технология машиностроения: учебник [Текст] / В.В. Клепиков, А.Н. Бодров. – М.: Форум: ИНФРА-М. – 2004. – 860 с.
3. Корсаков, В.О. Основы технологии машиностроения: учебник для вузов [Текст] / В.О. Корсаков. – М.: Машиностроение, 1974. – 336 с.
4. Паливода Ю.Є. Технологія оброблення важелів та вилок. [Текст] / Ю.Б. Капаціла, Ю.Є. Паливода, І.Г. Ткаченко. Тернопіль: Видавництво ТНТУ, 2013. – 55 с.
5. Паливода Ю.Є. Технологія оброблення валів. [Текст] / Ю.Б. Капаціла, Ю.Є. Паливода, І.Г. Ткаченко. Тернопіль: Видавництво ТНТУ, 2016. – 198 с.
6. Паливода Ю.Є. Технологія оброблення зубастих коліс. [Текст] / Ю.Б. Капаціла, Ю.Є. Паливода, І.Г. Ткаченко. Тернопіль: Видавництво ТНТУ, 2016. – 136 с.
7. Паливода Ю.Є. Технологія оброблення корпусних деталей. . [Текст] / Ю.Б. Капаціла, Ю.Є. Паливода, І.Г. Ткаченко, Гевко Ів.Б. Тернопіль: Видавництво ТНТУ, 2016. – 150 с.
8. Industrial Robotics: Technology, Programming, and Applications, McGraw-Hill Book Company, 1986 (co-authored with M. Weiss, R. Nagel, and N. Odrey). Automation, Production Systems, and Computer Integrated Manufacturing, Prentice Hall, 1987.
9 Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, originally published by Prentice Hall in 1996, and subsequently published by John Wiley & Sons, Inc., 1999.
10. Automation, Production Systems, and Computer Integrated Manufacturing, Second Edition, Prentice Hall, 2001

6. Policies and assessment process of the academic discipline

Assessment methods and rating system of learning results assessment

Forms of control of students' knowledge:
- current;
- modular;
- final (test, exam).
Assessment of students' knowledge at the university is carried out for 100-
score scale, which is translated accordingly into the national scale
("Excellent", "good", "satisfactory", "unsatisfactory") and scale
European credit transfer system (ECTS - A, B, C, D, E, FX, F).


Table of assessment scores:

Assessment scale
VNZ
(100 points)
National
(4 points)
ECTS
90-100 Excellent А
82-89 Good B
75-81 C
67-74 Fair D
60-66 E
35-59 Poor FX
1-34 F
Approved by the department
(protocol №
on «
»
y.).